For HGR15: use M4x16mm screws and M4 t-nuts For HGR20: use M5x16mm screws and M5 t-nuts Fit the screw into the linear guide and already fit the t nut and
Attach 6 V wheel assemblies to the Z plate with 30mm screws – and at one side of the plate, use 6mm spacers with a precision shim, whereas at the
Items you need for this step: 1 y plate left 1 y plate right 14 M5 nylon insert lock nut 2 Y inner side plate 14 V wheel assembly from
Items you need for this step: 48 v wheel shells 96 625-2RS bearing 48 precision shim
If you had trust bearings delivered, then you can apply tension from the outside, by putting a trust bearing and a lock collar at each outside of the leadscrew. You
*Update October 2nd: Since October 2nd, virtually all parts and supplies are finally back in stock; and despatch backlog has been worked through* Dear Customer, Let me start by
*** UPDATE June *** – Unfortunately we are still experiencing long delays from suppliers and some deliveries are taking longer than normal. Dear customer, First of all, we
Universal Gcode Sender’s website is https://winder.github.io/ugs_website/ UGS itself can be downloaded from their download page: https://winder.github.io/ugs_website/download/ Then, there is a choice of two version (Classic and Platform). If you download
Before carving, it is a good idea to check that the distances on your screen’s commands will actually correspond with the same distances that the machine will make. If not,
