For HGR15: use M4x16mm screws and M4 t-nuts For HGR20: use M5x16mm screws and M5 t-nuts Fit the screw into the linear guide and already fit the t nut and
Attach 6 V wheel assemblies to the Z plate with 30mm screws – and at one side of the plate, use 6mm spacers with a precision shim, whereas at the
Items you need for this step: 1 y plate left 1 y plate right 14 M5 nylon insert lock nut 2 Y inner side plate 14 V wheel assembly from
Items you need for this step: 48 v wheel shells 96 625-2RS bearing 48 precision shim
If you had trust bearings delivered, then you can apply tension from the outside, by putting a trust bearing and a lock collar at each outside of the leadscrew. You
*Update October 2nd: Since October 2nd, virtually all parts and supplies are finally back in stock; and despatch backlog has been worked through* Dear Customer, Let me start by
*** UPDATE June *** – Unfortunately we are still experiencing long delays from suppliers and some deliveries are taking longer than normal. Dear customer, First of all, we
Clicking on the green “carve” button for the first time will prompt you to do “machine setup”: Or if you have already used the program before, it is possible to
