Items you need for this step: or 1 spindle mount or universal spindle plate 4 button head cap screws M5 40mm (or 45mm) 4 v wheel assemblies (assemble these out

The machine can drill its own holes, that you can use to screw in the M5 threaded inserts. They are not compulsory for the functioning of the machine, but they

Attach the DC jack to the X carriage: And connect the only 2-wire cable that has no X, Y or Z marking – that’s the Z-probe’s cable:

Install the limit switch at the back of the X carriage with M2x14mm screws Do the same at the side plate at the side where the drag chain will be.

Now just plug the connectors according to their color, and plug the AC cable and connect the usb cable to the computer If you use the high performance controller: You