Workbee style CNC assembly instructions (ballscrews)

Wheel assembly

Items you need for this step:

48v wheel shells
96625-2RS bearing
48precision shim
for this step, all same as original workbee instructions
Attribution and credit: picture copied from from file “WorkBee-Screw-Assembly-Manual.pdf” as made by Ooznest and made available under Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) license (link: )

Each wheel assembly will require one wheel shell, two bearings and one precision shim:

Push a wheel shell over a bearing:

Then, place another bearing with a precision shim on top of it:

And push the remaining open side of that wheel on it:

If the precision shim would prevent you from pushing the bearings well in place, then you can use a hex driver or something fine (tooth pick etc) to reposition it a little bit, so that the bearings can be pushed well in place.

Do this for all 48 wheels

Suggest Edit


Translate »